Tag: work light

LED Spotlight – Decrease Your Electric Bill

Every month you open your electric bill only to find out that it’s been slowly rising. One solution you can think of is to use LED spotlights that can help decrease the amount of energy that takes to light your home or office. While many other older light bulbs can get the job done, they often can rack up your other expenses because they need to be frequently changed. By deciding to switch to LED spotlights, you’ll be able to save energy, replace them less, and have the added benefit of changing the new ones only after a few years.

Easy to Change

Many of us have probably experienced the struggles of changing a light that’s not so easy. While the regular bulbs on lamps are easy to change without much hassle, high stair landings, overhead lights, and tube lighting sources usually are not only hard to reinstall, but also very dangerous. Switching to using a LED spotlight can help save you this hassle and is one of the perfect solutions for you. They not only are easy to change, but they also last longer than regular light sources. Meaning you won’t have to change them regularly.

Less Energy Consumption

LED spotlight bulbs only use three ¾ watts of power and 120 volts while regular puts use way more than that. This means you can take fewer trips to the store, and fewer trips to try and change them. The bill will instantly be going down once you make this switch. Ceiling fans, over the front doors and stair landings, can all be changed infrequently as well. You need to make sure to install a 12-volt bulb into the right socket or else it will be damaged. The LED spotlight bulbs don’t contain lead or mercury, meaning you will be ecologically aware at the same time you’re providing your home with a clean lighting source. Click more.

Transformative

Use LED lights to help transform regular places on your property into magical wonderlands of light for a lower and more efficient price. You’ve probably seen plenty of TV shows or catalogs that have a beautifully lit garden or patio. You may assume that setting these up is expensive and a waste of energy, and you’re right for the most part. However, with LED spotlights you can set up your lightshow for a fraction of the cost.

Conclusion

Discover all these wonderful benefits by making the switch to LED spotlights. You can find them in many different styles, colors, and choices depending on where you check. If you can’t find them in a store near you, you can check out your online shops. Head online today to find bundle deals and make your home more energy efficient, easier to manage, and all of this comes at a lower price! Click here for more information: http://www.larsonelectronics.com/c-603-temporary-construction-lights.aspx

Please follow and like us:

NSF Zones and Classifications for Food Processing Lights

The National Sanitation Foundation (NSF) governs and certifies equipment in the food service and manufacturing sector. Through various regulations and standards, the non-profit organization actively promotes food safety. For safe illumination in food processing sites, the NSF certifies lighting systems to ensure proper performance in such environments. Fixtures in industrial food manufacturing facilities must be capable of withstanding water jets from frequent wash-down sessions, as well as extreme temperatures found in sterilization tanks and freezers. Read below to learn more about food processing lights.

Non-food Zones

According to the NSF, a non-food zone is a location that doesn’t come in direct contact with food, food products and materials. Furthermore, a lighting system in this section of the food processing facility is expected to be exposed to cleaning agents and solutions used during wash-down sessions.

Based on these characteristics, a work light in a non-food zone should be waterproof, with an IP rating of IP65 or higher. Additionally, the units should be protected with shatterproof lens in order to reduce the risk of breakage, when exposed to water jets or during maintenance. For the light’s housing, materials capable of resisting corrosion are preferred. This can increase the lifespan of the units and decrease warping.

Splash and Food Zones

Like non-food zones, splash zones in food processing plants does not come in direct contact with food, food products and edible ingredients. Lights installed in such parts of the building must be able to withstand high-pressure, water jets from wash-down sessions.

Examples of splash zones include wet food processing locations and sections of the facility that experiences constant wash-down. By comparison, examples of non-food zones include dry food processing locations, industrial kitchens and large-scale food storage rooms.

Lastly, it is important to highlight that the NSF does not provide guidelines for lights in food zones. This is because the organization does not expect lights to come in direct contact with food products.

Please follow and like us:

Understanding NEC Guidelines for Lampholders and Lighting Guards

Lighting components used in extreme work sites need to be protected with lighting guards, to prevent damage to the luminary. The National Electric Code (NEC) has acknowledged this requirement in their handbook, specifically in Section 410.

Read on to learn about NEC recommendations for equipping industrial lights with protective components.

Damp and Wet Locations

The 2011 edition of the NEC handbook suggests that lampholders be applied, based on the environment of the work site (Section 410.96). This is an update from a previous version of the code, which recommended lampholders used inside damp or wet locations to be weatherproof. The update was needed because weatherproof is not a common feature in lights for damp locations (based on its definition).

The NEC defines damp locations as environments with moderate protection from harsh weather and the ingress of liquids. Examples of such locations include porches and canopies where only special types of spotlights should be used.

From a cost perspective, the updated NEC guideline could help businesses reduce operational and equipment costs in damp locations (while streamlining compliance with the NEC handbook), as weatherproof protection requires robust materials and ratings.

Combustible Materials

Lights setup next to combustible materials must also be well protected, via shades or guards, as set forth in NEC Section 410.11. Notice that this guideline does not include lampholders.

An update to the 2011 handbook includes lampholders, but with special temperature-related conditions. According to NEC Section 410.97, such components should be reinforced with guards, when next to a combustible material, ensuring exposure does not exceed 194°F.

But why this threshold?

By design, lampholders are subject to increased heat and high temperatures due to their applications. The units are primarily used to hold lights that emit large amounts of heat. With this in mind, there is a risk of accidental ignition. Most lampholders typically fail due to overheating, rough contact or mechanical oversight.

Please follow and like us:

How To Choose The Appropriate Work Light for Your Needs

Whether you work inside or out, lighting is always an important element that must be considered. When you work outside during the evening, you are likely to need a high intensity work light to help you complete your tasks. However, not all work lights are the same nor do they offer the same features. Choosing work lighting is not easy but looking into the Internet is the best solutions to have. With so many different options on the market, how do you go about picking the best light for your needs? When choosing a work light, there are three considerations that you will want to keep in mind.

Purpose

When picking out a light, you need to know exactly what you are using the light for. For example, working outdoors at night on construction projects will require more intense lighting than working in an office or garage. Photography also requires more specific types of lighting. Once you have established the purpose for which the light is needed, you can begin to compare the lights that are designed for your particular needs and thus, narrow down your list. This is such a very important thing to keep in mind and one of the most important features to consider on work place.

Power Source

You may not always have access to a power source and this is something that you need to keep in mind. Many lights are designed to run on battery power for extended periods of time, but come with other considerations such as the cost and availability of batteries. If you have access to a power source, such as a vehicle or a power outlet, your options will be considerably larger. Also keep in mind that some lighting sources do not adapt to the normal power outlets that are available. Be sure to research the appropriate power source that you will need before purchasing any type of lighting element. Power saving is also important to see before choosing a lighting source to save money.Read post from http://www.stuff.co.nz/manawatu-standard/news/92600978/led-street-lights-are-fine-but-there-are-not-enough-of-them for more details.

Brightness

Led lightsDepending upon the scope of work you do, the brightness of your required work light may vary. Some variations of work lights come with fluorescent lighting while others rely on LED lighting. If you are working in a dark atmosphere, fluorescent lighting may be what you need. Other purposes may be carried out with simple LED or regular wattage bulbs, especially if you are working indoors. Lots of people choose LED lights not just because they can save money, but also they can use it well in their work as it really delivers a high-quality, clear lights at night.Checkout website at http://www.larsonelectronics.com/c-603-temporary-construction-lights.aspx

As with any piece of equipment, you will want to do adequate research and determine that the product you are purchasing will work for you. Consider that a Twin Head Portable Worklight is good for outdoor work. You want to ensure that you buy the best possible element for your needs. And portability might be an additional feature to consider. Check this out!

Please follow and like us: