Category: LED Lights

High Bay vs Low Bay LED Lights for Industrial Buildings

The height at which lights are installed matters. In industrial facilities, businesses may choose to illuminate operating floors with high bay or low bay LED fixtures. The units both offer powerful illumination; however, their applications and beam structure vary greatly.

This article compares the differences between high bay LED lights and low bay LED fixtures.

Watts and Beam Configurations

Based on the terms used to identify and classify the lamps, it is possible to quickly distinguish their applications. High bay LED lights are recommended for rooms with ceiling height measurements taller than 20 feet. Moreover, a majority of high bay LED lamps are offered at 150 watts or higher. When it comes to beam angle, the units provide a narrow beam configuration (usually narrower than 90 degrees). This helps the fixtures reach the operational floor from high-ceiling installations.

Low bay LED fixtures are suitable for locations with ceiling measurements ranging between 12 feet and 20 feet. Additionally, because the lights are close to their targets, lower wattage units with wide beam configurations are needed for comprehensive illumination. As a result, most low bay units are offered roughly at 60 watts, 80 watts and 100 watts. Beam angles for the LED variants are typically wider than 90 degrees.

LED Applications

There are several things to consider, when choosing between a high bay LED lamp and a low bay LED fixture. High bay LEDs enable businesses to illuminate vertical surfaces, as well as the operating floor. Such features are perfect for warehouses and buildings with a lot of vertical shelves.

Lastly, both units leverage special optics and reflectors to create a robust beam. Versatile mounting features can help both types of LED fixtures improve the reach of their light beams, which is recommended for rooms with heavy-duty machines and large structures, such as tanks.

Please follow and like us:

LED Spotlight – Decrease Your Electric Bill

Every month you open your electric bill only to find out that it’s been slowly rising. One solution you can think of is to use LED spotlights that can help decrease the amount of energy that takes to light your home or office. While many other older light bulbs can get the job done, they often can rack up your other expenses because they need to be frequently changed. By deciding to switch to LED spotlights, you’ll be able to save energy, replace them less, and have the added benefit of changing the new ones only after a few years.

Easy to Change

Many of us have probably experienced the struggles of changing a light that’s not so easy. While the regular bulbs on lamps are easy to change without much hassle, high stair landings, overhead lights, and tube lighting sources usually are not only hard to reinstall, but also very dangerous. Switching to using a LED spotlight can help save you this hassle and is one of the perfect solutions for you. They not only are easy to change, but they also last longer than regular light sources. Meaning you won’t have to change them regularly.

Less Energy Consumption

LED spotlight bulbs only use three ¾ watts of power and 120 volts while regular puts use way more than that. This means you can take fewer trips to the store, and fewer trips to try and change them. The bill will instantly be going down once you make this switch. Ceiling fans, over the front doors and stair landings, can all be changed infrequently as well. You need to make sure to install a 12-volt bulb into the right socket or else it will be damaged. The LED spotlight bulbs don’t contain lead or mercury, meaning you will be ecologically aware at the same time you’re providing your home with a clean lighting source. Click more.

Transformative

Use LED lights to help transform regular places on your property into magical wonderlands of light for a lower and more efficient price. You’ve probably seen plenty of TV shows or catalogs that have a beautifully lit garden or patio. You may assume that setting these up is expensive and a waste of energy, and you’re right for the most part. However, with LED spotlights you can set up your lightshow for a fraction of the cost.

Conclusion

Discover all these wonderful benefits by making the switch to LED spotlights. You can find them in many different styles, colors, and choices depending on where you check. If you can’t find them in a store near you, you can check out your online shops. Head online today to find bundle deals and make your home more energy efficient, easier to manage, and all of this comes at a lower price! Click here for more information: http://www.larsonelectronics.com/c-603-temporary-construction-lights.aspx

Please follow and like us:

Benefits of Programmable LED Outdoor Signs for Advertising

Outdoor advertising is an innovative way to reach the local population. From a long-term perspective, customizable LED signboards provide unique advantages over other advertising techniques. This article explores the usefulness and benefits of LED outdoor signs for companies, local establishments and organizations.

Comparing Cost and Rates

Investments in LED outdoor signs with custom features are cost-effective, compared to traditional advertising methods. A programmable LED board can provide roughly 1,000 exposures for $0.15 – depending on the location of the installation.

Newspapers cost an average of $7.50 per 1,000 exposures, while radio advertising offers $5.50 per 1,000 blocks of exposure.

LED signboards can also be customized and changing one’s message or ad does not require extra charges (as long as you own the unit and space). Of course, more LED lights equate to an increase in electricity upkeep. However, because LEDs are energy-efficient, the additional cost is still minimal.

Even with the outdoor sign activated for long periods of time, replacement and maintenance can be avoided, as LEDs come with an average lifespan of 50,000+ hours.

Maximizing Exposure

Maximizing exposure is one of the best ways to get the most a customizable LED sign. There are several ways to achieve increased exposure for brick-and-mortar establishments. One method is by elevating the sign, so that pedestrians and vehicles can see the board from a far distance. This option is also useful for congested areas with tall buildings, structures and trees.

Color selection also matters, as bright and upbeat colors tend to quickly catch the attention of individuals. Durability should be prioritized for businesses intending to keep their signs up for long periods of time. This ensures that while other advertising boards are down in the area (possibly due to bad weather), your programmable LED sign is still up. With this in mind, waterproof units are highly recommended.
For more info on commercial led lighting visit our sponsor https://www.larsonelectronics.com/c-140-led-lights.aspx

Please follow and like us:

Effects of Vibration on Industrial LED Lights

Industrial lighting systems are exposed to vibration from nearby heavy-duty equipment, as well as wind. Such elements become amplified when the units are mounted on a pole. Read on to understand how to address and reduce vibration-related issues for Industrial LED lights in rugged work environments.

Sources of Vibration

In outdoor work sites, such as construction, light poles are prone to random blasts of wind. Such locations can be areas with minimal buildings or obstructions to redirect wind, as well as high elevation or mountainous regions.

Interestingly, poles at heights 20 feet (or higher) are more likely to experience strong vibration from windy elements. As mentioned earlier, drills, road traffic and pumps can also contribute to vibration for LED lights. Over time, the sources of vibration may result in minor cracks. The presence of extreme heat is known to streamline vibration-related damage.

Preventing Vibration in Light Poles

LEDs, due to their solid state design, are capable of withstanding vibration better than traditional light sources with loose filaments. Because of this, upgrading to industrial LED lights is one of the most effective ways to address vibration. Additionally, LEDs come with longer lifespans and superior illuminative properties.

Other solutions for reducing vibration for light poles and industrial LED lights include the installation of vibration dampeners. The components are designed to absorb shaky elements, so that it can be moved away from sensitive parts of the pole.

Operators may also choose to setup internal chains from the top of the pole, which serves as an absorber. This option is effective for lightweight systems, ensuring the added weight from the chains will anchor the pole securely on the ground.

In order to properly address vibration, one must first know the type of vibration at the work site. Such types include: first mode and second mode vibration.

Please follow and like us:

Green LED Strobe Light Applications in Industrial Work Sites

LED strobe light can come in different colors and flashing patterns, depending on their applications.

For instance, red strobing units are typically associated with emergency vehicle fleets, including fire fighters and police. Blue LED strobe lamps are suitable for law enforcement, while white or clear is a secondary color to boost visibility during operation.

This article focuses on widespread applications for green LED strobe lights.

Applications and Specifications

Green LED strobe fixtures are not associated with any official activities. However, the light color can be applied to improve safety or security, as it is a preferred choice by emergency representatives.

The Department of Homeland Security recommends these compact lamps for use on private vehicles, which must be owned by a certified personnel in the medical field. Such professions include medical service driver, first responders and more.

According to the agency, the units should be capable of emitting more than 50 candlepower and must be installed at the roof of the vehicle. Furthermore, the LED lights must strobe at 360 degrees in a flashing pattern for maximum visibility. Only two lamps can be displayed at a time.

The type of LED strobe light recommended by the Department of Homeland Security is a unit that utilizes a green lens for color. Green bulbs with clear or uncolored lenses are not preferred by the agency. The robust units should also be standalone (not incorporated with other LED lighting systems on the emergency vehicle).

Acquiring a Strobing Permit

In some locations in the US, a permit from the relevant agency is required, when operating a green LED strobe light. Requirements for the permit are minimal and may vary from state to state. In Indianapolis, the application for green light permit requires the individual to first obtain a state certificate number and a valid driver’s license.

Please follow and like us:

FAA Regulations for Obstruction Lighting on Industrial Wind Turbines

Tall industrial structures, from cranes to temporary towers, are closely regulated by the FAA. The agency asserts guidelines for visual safety, ensuring that proper lighting is available for detection. Aircraft pilots rely on obstruction lighting to evade the structures at night.

For wind turbines, the FAA provides several recommendations in relation to the type of lights, flashing efficiency rates and spacing during installation.

FAA Regulations and Wind Turbines

The application of obstruction lighting in wind farms is governed in FAA Advisory Circular AC 70/7460-1K (Chapter 13).  When a group of wind turbines is used to form a ‘farm’ the agency asserts that only three turbines exceeding 200 feet (from ground level) can be utilized.

Interestingly, not all of the units require obstruction lighting.

According to the FAA, operators must carefully install the lights, so that spacing does not exceed ½ statute mile. By definition, a statute mile is equivalent to 5,280 feet or 1,609.34 meters.

Flashing and Durability

The FAA cited Type L-864 red flashing luminaries as the standard for illumination at night. In most cases, these are strobe lights (with flashing capabilities), which are used for visual notification. When multiple flashing lights are applied in a wind turbine farm, the luminaries must have simultaneous flashing patterns.

As for materials used, the FAA recommends the use of aluminum (under IFH-1710). At high altitudes, the units are exposed to devastating winds, rough weather and debris. Because of this, ease of maintenance is prioritized by the FAA.

Field-repairable features are required to streamline access and reduce complex maintenance tasks. For obstruction lights on wind turbines, this includes an accessible hinged door that can be locked and secured for protection. To reduce frequency of maintenance, LED lights can be utilized. The luminaries offer 50,000+ hours of illumination and support compatibility with low voltage (DC) sources and photocell sensors.

Please follow and like us:

3 Advantages Of Led Temporary Lighting For Applications

Nowadays, technology is changing almost faster than you can blink and the world of lamps is not any different. LED Temporary Construction Lights is the new frenzy, but what exactly are the huge benefits and just how do they apply to users of temporary job site lamps?

Higher Durability

Typically LED lamps are replacing some lighting with a glass envelope and possibly a fragile filament, such as fluorescent, incandescent, or high strength discharge (HID). Through the elimination of these vulnerable components, LED Temporary Construction Lights offers users a more solid solution for industrial work lights. This is key for users of short-term jobsite lamps, where lighting is subjected to a whole lot of misuse from disassembly, travel, and reassembly.

Longer Life

LEDTemporary Construction Lights has the benefit of offering a long life period, typically 25,000 hours or more.  Compared to incandescent, which even durable models are often rated at 10,000 hours or less, LEDs can offer users the best profits in return even before their lower ability consumption is considered!

Lower Electricity Consumption

Lower power intake means lower voltages, lower currents, or both. This offers to the end user:

  • LOWER CURRENT DRAW

LED Temporary Construction Lights use less electricity, and less vitality means lower current. For users of temporary job site lighting, this is key. Often short-term work lights are being used in the format of long strings, such as what is employed during tunnel construction. Over these long strings, voltage damage due to the resistance to the cable can be considerable. To pay heavy gauge lower resistance cable television is used. This lower current draw allows a lighter measure cable to be used, which to the end user means lower cost. Alternatively, LED light allows a lot longer strings have been recently available.

  • LOWER VOLTAGE

Less power also means that you can run the LEDs at alower voltage (if you are by using a light made for this type of software), meaning that high lumen outputs are now open to users who have low voltage requirements.  Incandescent offerings have been designed for low voltage users for a long period, but their high power consumption offers a significant disadvantage at these low voltages.

High electricity at low voltages means high current, and high current means high voltage drops over long cable lengths. In earlier this, low voltage users got to pay by using fewer light bulbs or shorter strings than their higher voltage counterparts. No more! Now low voltage users can decide on a temporary lamp solution in an LED. These LED Temporary Construction Lights provide light outputs and string measures that are competitive with their high voltage incandescent equivalents.

  • LOWER COST

Lower wattage means fewer kilowatt time on your expenses. A 100-watt incandescent uses that, 100 watts. A typical 100 watt LED comparable uses 15 w.

For a 1000 foot string with bulbs every ten feet and an electricity cost of $0.07 per kilowatt hour, the LED will save the end user $0.70 each hour. In the 25,000-hourlifespan of the bulb that means a personal savings of $17,500!

There are various advantages to using LED Temporary Construction Lights as your short-term job site lighting provider. Keeping up with the trends can allow your job site to get the job done well and do it securely.

Please follow and like us:

How Safety Light Curtains Work?

 Safety light curtains are a modern way of protecting personnel around many risky machines. Safety light curtains offer freedom just like temporary Construction Lights, flexibility and reduced operator tiredness when compared with traditional guarding methods, for example, mechanical barriers, sliding gates and pull-back restraints.

By reducing the need, where applicable, for solid guards, safety lights curtains merely simplify routine tasks like machine setup, maintenance and repairwork the same as construction light.

How The Safety Light Curtain Work?

A photoelectric transmitter projects an array of synchronised, parallel infrared light beams to a receiver unit. When an opaque object blockbeams in the sensing field, the control logic of the light curtain then sends a stop signal to the protected machine.

The transmitter unit has light emitting diodes (LEDs) that produce pulses of invisible infrared light when energised by the light curtain’s timing and logic circuitry. The light pulses are both sequenced – one LED is energised after another – and modulated – pulsed at a particularrate. The corresponding phototransistors and assisting circuitry in the receiving unit are made in such a way that they detect only the particular pulse and frequency made for it. These methodsprovide enhanced safety and rejection of external light sources. The control logic, user controls and diagnostic signals may be contained in a different enclosure or be closed together in the same housing as the receiver electronics.

The use of construction light Safety light curtains is Control Reliable. Control Reliability is the machine capability to control components and related interfacing to attain a safe state in the event where a failure occurs within their safety-related functions.

In contrast to photoelectric sensors, light safety curtains use self-checking circuitry to monitor the light curtains for internal faults. If an internal error is identified, the light safety curtain in an instantcommunicates a stop signal to the guarded machine. The light curtain then places itself in a lockout condition. Only after replacement of the failed component and an appropriate reset will the light curtain be restored to operating condition. Another example of safety monitoring are the safety redundant safety outputs as done using construction light.

Typical Applications
Protecting an operator from the risk associated with material positioning or where a process is performed is known as the point of operation guarding. Construction light is Another name for the point of operations is the zone of hazardous operation or the pinch point. This design of safeguarding is associated with mechanical and hydraulic power presses,  forming,  moulding presses, stamping, riveting, automated assembly machinery and eyelet. Light curtains used in these applications are chosen for finger and hand safety.

Perimeter guards safeguard the edge or boundary defined by a robot machine or other equipment. In these applications, light curtains are usually selected to detect the presence of personnel and signal the device controller to hinder hazardous conditions while staff are present within the safeguarded area. The light curtain reset switch also must be located outside and around the view of the protected area to avoid an inadvertent resumption of machine movement. Light curtains for perimeter guarding applications are chosen for torso detection although you can still use construction light. Check this site : http://www.larsonelectronics.com/c-603-temporary-construction-lights.aspx

Please follow and like us:

The Importance of Choosing the Right Work Lights for Harsh Conditions

Illuminating work areas at night can increase safety and productivity. It’s important to choose work lights that light up the area effectively to improve visibility and increase safety aspects. This is especially true in harsh conditions, such as the Australian outback, or in touch industries, such as mining, drilling, earth moving or agricultural industries. See other details and make sure you have it all.

Here are some things to look for before choosing work lights for harsh conditions:

Durability and Toughness

Always seek out heavy-duty lighting built specifically to withstand the environment they’ll be used in. This means ensuring that all lamps are encased in high impact nylon housing that reduces the risk of breakage. Lights should also be made with hardened glass lenses.

There are plenty of heavy-duty flood lights and spot lights available that are specifically designed and made to withstand extreme conditions that exist in the mining, drilling, earth moving, or agricultural industries.

Longevity

Illuminating work areas properly at night is important for safety and for productivity. For this reason, you need to be sure you choose lighting that will last a long time without needing to be replaced. This reduces maintenance time and ensures work areas remain well-lit when you need them most.

Halogen bulbs do offer long life spans, but there are also many benefits to considering LED lights as well. For instance, LED lights don’t simply go out when their life span ends. Rather, they tend to dim gradually over a period of time. This still allows the area to remain well-lit until the lamp can be replaced, thus improving safety on the work site at night.Get some information from http://www.mustangandfords.com/parts/1704-mychanic-expands-led-work-lighting-with-two-new-offerings/

Weather Resistant

The harsh weather conditions in the Outback mean that any lights or lamps chosen need to be able to withstand the elements. Ideally, you should always choose work lights that are encased in dust resistant and water-resistant casing.
The power switch should also be housed in waterproof silicon rubber casing to prevent electrical shorting and other hazards.

LED vs. Halogen Lighting

Work LightsHalogen burns very hot, producing plenty of yellowish light and plenty of heat. Work lights using halogen bulbs are good for casting a wide area of light around a work space. This makes them ideal for use as flood lights or for spot beams to illuminate specific areas properly. Take care that safety precautions are taken, as the bulbs can become extremely hot after use.

LED lights cast a very bright, white light, which can be ideal for lighting work areas for maximum visibility at night. These lights use much less power than other forms of lighting, so they’re very efficient. They also don’t generate heat, which increases safety and reduces risk of fire accidents. No more extra tricks, choose what you want, and choose only the best.

Working in extreme or harsh conditions is difficult enough. Don’t make it any more difficult than it needs to be when working at night. Choose the right work lamps to keep important areas well-lit and you’ll reduce safety risks dramatically.

Please follow and like us:

How To Choose The Appropriate Work Light for Your Needs

Whether you work inside or out, lighting is always an important element that must be considered. When you work outside during the evening, you are likely to need a high intensity work light to help you complete your tasks. However, not all work lights are the same nor do they offer the same features. Choosing work lighting is not easy but looking into the Internet is the best solutions to have. With so many different options on the market, how do you go about picking the best light for your needs? When choosing a work light, there are three considerations that you will want to keep in mind.

Purpose

When picking out a light, you need to know exactly what you are using the light for. For example, working outdoors at night on construction projects will require more intense lighting than working in an office or garage. Photography also requires more specific types of lighting. Once you have established the purpose for which the light is needed, you can begin to compare the lights that are designed for your particular needs and thus, narrow down your list. This is such a very important thing to keep in mind and one of the most important features to consider on work place.

Power Source

You may not always have access to a power source and this is something that you need to keep in mind. Many lights are designed to run on battery power for extended periods of time, but come with other considerations such as the cost and availability of batteries. If you have access to a power source, such as a vehicle or a power outlet, your options will be considerably larger. Also keep in mind that some lighting sources do not adapt to the normal power outlets that are available. Be sure to research the appropriate power source that you will need before purchasing any type of lighting element. Power saving is also important to see before choosing a lighting source to save money.Read post from http://www.stuff.co.nz/manawatu-standard/news/92600978/led-street-lights-are-fine-but-there-are-not-enough-of-them for more details.

Brightness

Led lightsDepending upon the scope of work you do, the brightness of your required work light may vary. Some variations of work lights come with fluorescent lighting while others rely on LED lighting. If you are working in a dark atmosphere, fluorescent lighting may be what you need. Other purposes may be carried out with simple LED or regular wattage bulbs, especially if you are working indoors. Lots of people choose LED lights not just because they can save money, but also they can use it well in their work as it really delivers a high-quality, clear lights at night.Checkout website at http://www.larsonelectronics.com/c-603-temporary-construction-lights.aspx

As with any piece of equipment, you will want to do adequate research and determine that the product you are purchasing will work for you. Consider that a Twin Head Portable Worklight is good for outdoor work. You want to ensure that you buy the best possible element for your needs. And portability might be an additional feature to consider. Check this out!

Please follow and like us: